Product Details:
Driven Type | Electric |
Voltage | 230/440 V |
Frequency | 50 Hz |
Dimension | 600 x 1200 x 2400 mm (Approx) |
Speed | 1200 Pouches/hour for milk |
Cooling Water | 120 Liters/hour |
Phase | 1/3 Phase AC |
Accuracy | +/- 7 ml |
Film | Lay-flat roll of 325 +/- 1 mm, Food grade LDP - Virgin |
Machine Tank Connection | Inlet 1 inch, Outlet 2 inch |
Features | SMS for Over-flow |
We Are Offering
Liquid Packing Machine To Our Clients. A Fully Automatic Form-Fill-Seal Machine Which Makes Poly-Bags From The Poly-Roll, Fills Them With Milk/Liquid And Seals Them To Get Ready Poly-Bags.
Salient Features:
- Very Easy Operation.
- Low Power Consumption.
- Low cost of Maintenance.
Frame:It is made out of MS flats, Angles, Plates Etc. Epoxy painting/powder coating and has cladding with necessary doors.
Polythene Roll:Lay flat roll is loaded on pairs of rollers.
Guide Rollers:Poly film passes over these guide rollers smoothly.
Film Release:Roll is pulled to release the film as required.
Forming Collar:The lay flat polythene is made into tube as it passes over forming collars.
Vertical Seal: The overlap of the tube is sealed by impulse sealing technique to form tube around the milk filling pipe.
Bag pulling: Two pairs of rollers are provided which pull the formed poly tube as per set required length of the bag.
Tank:Overhead machine tank of 25 liters capacity is provided with overflow arrangement to maintain the fixed head to get good accuracy.
Filler:The liquid filling valve is opened to fill required quantity of liquid into the pouch electro-magnetically.
Horizontal Seal:Top of the filled pouch and bottom of the next pouch is horizontal sealed and cut using impulse sealing technique.
Pouch Tray:The filled pouches are collected in the tray for further storage.
Drive:Required motions are obtained from main cam shaft run by gear box powered by motor. No pneumatic/hydraulic systems required.
Cooling water:As high heat is generated in horizontal and vertical sealers for sealing, both the jaws are provided with water cooling circulation facility.
Other Details:
- All milk contact parts are in stainless steel is 304-mat finish a cycle mechanic can maintain the machine easily as there are no difficult electronic/pneumatic systems.
- Due to its simplicity, maintenance is very easy- machines supplied in 1995 are working well after 20 years.