Stair Lift

Product Details:

To understand your Staircases properly we need following info:

In case of Single straight Staircase - Nos steps

Distance from 1^st step to last step

Height from ground to the 1^st floor

Exact quote can be given after receiving your staircase data:

Do send us few photos and progressive video/movie showing all stairs and all steps from 1st step to the last step on our mail or our WhatsApp to give you budgetary offer. You are welcome to give info on both Phone Numbers given above.

Curved Stair lift:

This lift is suitable for curved staircases. One can travel from ground to 1st or 2nd or 3 rd --nth floor directly without stopping on landings or on intermediate floors.

In the curved staircases, the 1st part of the staircase is straight (inclined), therefore there is curve on the landing or on the floor and again straight (inclined). As the chair of the lift turns around, it is called curved stair lift.

In our design, the main member supporting the lift is rectangular pipe and it is fitted overhead. This overhead main pipe is supported by the rectangular pipe fixed on the side walls. The trolley having the drive unit travels on this overhead main pipe. The chair is hung and hinged to the trolley. Naturally the chair and the user is vertical position by default.

Due To Our Overhead System, We Have Following Advantages:

No blockage of steps. Others can use stairs easily.

Chair can be disconnected and kept aside and a wheelchair or stretcher can be attached to the trolley.

Remote call facility also available to call it at the required floor.

Very good for sponsorship flat schemes as right of use of staircase of others is not disturbed as this design provides for enough head clearance and does not cover any steps even after installing this curved stair lift.

Product Details:

The Mild Steel main tube of 100X50X2.5/3 thk mm section is permanently fixed at about 1500 mm above the staircase slope. It is The tube is supported on the wall with the vertical pipes fitted in the wall and the steps(if required) with fasteners. t is fixed at about 175mm from the wall. After the straight portion of the staircase is over, the curved section of same size continues in the landing part of the staircase (which is flat). Again after the landing part is over, same tube is fitted on the next straight staircase section. Rack is fixed to this tube on the top of the main tube.

There is a special trolley which glides over the rack and tube fitted over-head. The main drive unit having BLDC motor and Gear Box are fitted in this trolley. It also has Battery and other required mechanism. The chair is fixed to the trolley. The trolley has Stainless Steel covers.

All the shafts, pins are tested for Non-Crack Detection. The seat base is folding one. The two arms of the chair are also folding. In the right hand arm at the tip of it, a JOYSTICK is fitted. As the Joystick lever is pressed UP side, the motor rotates clockwise and the chair glides up over the SS tube. If the Joy stick lever is pressed DOWN side, the motor rotates anticlockwise and the chair glides down over the SS tube. If the Joystick lever is released in between, the chair halts immediately.

Shock absorber and auto-stop facility is provided at the bottom of the SS tube. Also as the chairs rests at the top or at the bottom, it is connected to auto charging facility of the batteries. Due to this, the batteries are always charged. Seat-Belt is provided with easy fixing facility if asked. A battery charger is to be placed near the SS tube on a small shelf and the 2 wires carrying 24V DC are to be connected to the Charging points at the top and also at the bottom.

2 Remote controllers are also provided. One Remote unit is fitted at the Ground Floor. If Lift is at the 1^st floor and the other person has to use it, he has to press the CALL - Button of this Remote Unit. Due to this action, the lift will travel on own down and stop at the Ground Floor. Similarly, by pressing the Remote Button of the Unit fitted at the 1^st floor; it will travel on its own from the ground to the 1^st floor facilitating the other person to travel from 1^st floor to Ground.

Working of Curved Srair Lift:

Let's assume that the lift is at the bottom. The person unfolds the chair seat and the 2 arms and Foot Rest. He sits on the chair. He fastened the seat belt. He pushes the Joystick lever UP side, the motor rotates clockwise and the chair glides up over the SS tube. As he reaches the top he releases the Joystick to stop the motion of the chair. He fastened the Belt and gets down.

Similarly, if the chair is at the top, he unfolds the chair seat and the 2 arms and Foot Rest. He sits on the chair. He fastened the seat belt. He pushes the Joystick lever DOWN side, the motor rotates anticlockwise direction and the chair glides down over the SS tube. As he reaches the bottom, he releases the Joystick to stop the motion of the chair. He un fastened the Belt and gets down. He has to also fold the chair, arms and Foot rest to clear the stairs.

 

The main advantages of this OVER HEAD curved Stair Lift are:

• Since, the pipe is fitted over head, it does not permanently block the 200mm (8") of the Steps.
• The full staircase is available to other persons.
• The chair can be disconnected easily and kept aside if requires.
• The user can go directly to the other floors.

Additional Information:

• Pay Mode Terms: Other

Product Details:

Very Easy To Use:

• Just sit and shift the switch handle for up & down motion operates on 1 phase electricity.
• Very small blockage of stair case.
• Winding and unwinding of rope in winch pulls the chair up and down.
• Noisy operation and poor athletics.
• Can be used as baggage lift.

Product Details:

Owing to our expertise in this domain, we are offering an extensive range of Stairlifts. This Stairlift has Stainless Steel main pipe and other parts of the chair are manufactured using MS raw material with powder coating under the strict quality standards. The offered Stairlift is extensively demanded in residences, offices and  hospital. All main parts of the machine viz. BLDC motor, Gear box, Rack-Pinion, Electronics are same as that of ELEGANT MODEL. Due to powdeer coating, it can be supplied in various standanrd colours. For bulk ouder, we can give in the required colour scheme. 

Features:

• Sturdiness
• Durable finish
• Optimum performance

Additional Information:

• Production Capacity: 5
• Delivery Time: 4 weeks
• Packaging Details: Normal

Product Details:

This lift is suitable for straight staircases. One can travel from ground to 1st or from 1st to 2nd or 2nd to 3rd --nth floor.

This is cheaper version. The main member supporting the lift is mild steel I beam and it is fixed on the side walls at 1.3’ above the stairs.. At the top floor, a winch having winding and unwinding of rope drum is fitted. The rope is fixed to the chair. As the drum rotates with the winch motor the rope is wound over the drum and the chair is pulled up. As it rotates in other direction the rope unwinds and the chair travels down due to gravity. The switch pendant is provided to the user for up or down motion of the chair.

Main Advantages:

• It is very easy to use.
• Just sit and shift the switch handle for up & down motion.
• Strong & sturdy construction.
• The electrical supply wire also loops with the chair.
• It is bit noisy operation and athletics are comparatively poor.
• It can be used as luggage lift.